Service manual

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-30
•
This function runs a specified mechanism to check for operation.
<Setting Procedure>
1. Touch [Movement Check] to open the Movement Check menu screen.
2. Touch the desired subfunction.
Tech. Rep. Mode Movement Check
(7) Movement Check
Touch Panel
Display
Operation
ADF Paper Pas-
sage
Feeds paper through the ADF in the specified mode to check for cor-
rect operation.
<Procedure>
1. Select ADF Paper Passage.
2. Touch the desired mode key.
3. Load originals in the ADF.
4. Press the Start key to let the ADF start feeding originals.
✽
Pressing of the Start key temporarily stops the ADF. (Another press
will let the ADF resume the sequence.)
✽
The sequence is completed when there is no more originals in the
ADF; however, it is possible to halt the sequence in mid-operation
by pressing the Stop key.
Scanner
•
Drives the CCD.
•
Turns ON the Exposure Lamp.
•
Moves the Scanner according to the set value.
Exp. Lamp Check Checks for the intensity of the Exposure Lamp light.
1-sided No Detect 1-sided Mixed Orig 2-sided
SADF