Specifications

Initial Steps . . .
3
Di251/Di351 3-15
3.10 Placing Originals on the Glass
Place originals that cannot be processed by a document feeder onto the
original glass.
Paper Originals and Transparent Originals
1
Raise the original cover by at least
15°.
If the original cover is not open wide
enough, the original size will not be
detected automatically.
2
Place the original on the glass. The
side that is to be copied must be
down.
?
Doyouhavetoloadtheoriginals
differently than illustrated here?
Ü Define the original document
alignment. For more
information, see page 4-47.
3
Slide the original to the upper right
corner of the original glass.
4
Align the original with the Original
Scales.
?
Is the original transparent?
Ü Place a sheet of white paper of
thesamesizeontopofthe
original.
5
Close the original cover.
15°
Original Scales