Specifications

3
Initial Steps . . .
3-14 Di251/Di351
Loading 2in1 Originals for Page Separation
Load the 2in1 originals for page separation onto the duplexing document
feeder or the automatic document feeder.
1
Set the document guide to the size
of the original.
2
Load the originals into the
document feeder. The side that is to
be copied must be up.
3
Be to load the originals lengthwise
on the automatic document feeder.
4
Ensure that the stack of originals
does not exceed the maximum fill
height (see Ä mark on the
document feeder).
5
Push the originals flush up
against the feed chamber.
6
Start the copy cycle.