Specifications
Troubleshooting
7
Di251/Di351 7-3
7.2 If a Message Appears on the Touch Screen. . .
The touch screen shows messages that describe a copier mode or
malfunction. The following table will help you to understand common
messages and take the appropriate action.
Message Cause Action
Malfunction detected.
Call your technical
representative and
provide the error code:
A serious malfunction
has been detected in the
copier. No more copies
canbeproduced.
Call and inform your
technical representative
of the code displayed on
the touch panel.
Please add toner. The toner has run out. Replace the toner bottle;
see page 2-49.
The development unit
needs replacing. Please
inform your technical
representative.
Theservicelifeofyour
imaging drum has been
reached. No more copies
canbeproduced.
Call your technical
representative.
Stapler is empty. You
must replace stapler
cartridge or cancel the
Staple mode.
The staples have run out. Replace the staple
cartridge; see page 2-55.
Preventive maintenance
time
The copier is due for
preventative
maintenance.
Call your technical
representative.
Return the following # of
originals to document
feeder:
The displayed number of
originals could not be
processed.
Place the indicated
number of originals back
in the automatic
document feeder.
Image data has caused
memory overflow. Your
copy job has been
cancelled.
The memory capacity of
the copier is insufficient.
Create the copy with
different settings.
If this message is shown
often, increase the
memory capacity.
This mode cannot be
selected with the OOO
mode.
Certain modes cannot be
combined; see page 7-
44.
Cancel one of the two
functions.