Setup guide

Created by Stacey Hunt
Konica Minolta Hotline Support (UK)
17
SCAN TO FTP
Before setting up scan to FTP, you must follow the instructions at the
top of page 16 (points 1-6) and enter details under the SMTP & POP3
Configuration for your e-mail server. If you do not have an e-mail
server, you can also enter false details. As long as there is something
entered in to the top 4 fields, scan to FTP will work.
For information on configuring either PageScope Cabinet or IIS, please refer to
the Konica Minolta FTP & SMB Setup Guide for Windows.
PageScope Cabinet - Page 4
IIS – XP - Page 5
IIS – Vista - Pages 6
1) Enter the IP address of the Konica Minolta device into the address bar of
Internet Explorer and press Go
2) Log in to Admin Mode using the password of: sysadm
3) Click on the Scan tab at the top of the screen and then select ‘Speed Dial
Setting’ on the left.
4) Click on the box labelled ‘Speed Dial List (FTP Server)’
5) Click on the first available speed dial number
6) Enter in:
* a ‘Destination Name’. This can be whatever you want it to be.
* The IP address of the computer running PageScope Cabinet or IIS under
‘FTP Server Address’