Service manual

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-8
Code No.
Setting (The default is ).
C18
<Density ADF>
Adjust the copy image density level when the ADF is being used.
C19
<Priority Density>
Set the image density level for printing
C20 to 24
<Paper Auto Detection>
Select the system of measurement of the paper for automatic paper
size detection.
Initial setting: Metric area “1”/Inch area “0”
C20: 1st Tray C21: 2nd Tray C22: 3rd Tray
C23: 4th Tray C25: 5th Tray
C25
<Paper Size Detection>
Select the paper size detection method for the 1st Tray. If paper of a
nonstandard size is to be used, select “1.” Size input is made using
“U-4.”
C26
<Paper Type (1st Tray)>
Select the type of paper loaded in the 1st Tray.
C27
<Paper Type (Bypass Tray)>
Select the type of paper loaded in the Bypass Tray.
Highlighted
Setting Description
When the standard original (text, etc.) is used.
1 To give better reproduction of faint original.
0
Setting
0 1 3 4
Description
Lighter. Darker
2
Setting 0 1
Description Inch Metric
Setting 1
Description Automatic detection Size input
0
Setting 1 2
Description Plain Paper Cards OHP
0
Setting 1 2
Description Plain Paper Cards OHP
0