Service manual

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-7
Code No.
Setting (The default is ).
C11
<Margin Setting>
Adjust the margin width for the File Margin copy.
C12
<Erase Setting (Left)>
Adjust the erase width for the Left Erase copy.
C13
<Erase Setting (Upper)>
Adjust the erase width for the Upper Erase copy.
C14
<Erase Setting (Frame)>
Adjust the erase width for the Frame Erase copy.
C15
<Auto Panel Reset>
Select the time it takes the Auto Panel Reset function, which resets
the panel settings when the set period of time elapses after a copy
cycle has been completed or the last key operated, to be activated.
C16
<Energy Saver>
Select the time it takes the copier to enter the Energy Saver mode
after a copy cycle has been completed or the last key operated.
C17
<Auto Shut OFF>
Select the time it takes the Auto Shut Off function, which shuts down
the copier when the set period of time elapses after a copy cycle has
been completed or the last key operated, to be activated.
Note:
• The option of “0” can be set if “Yes” is selected for “Disable Auto
Shut OFF” of the “Administrator Mode” function.
Highlighted
Setting
0 ................................. .......................... 20
Description (mm)
020
10
Setting
5 ................................. .......................... 20
Description (mm) 5 20
10
Setting
5 ................................. .......................... 20
Description (mm) 5 20
10
Setting
5 ................................. .......................... 20
Description (mm)
520
10
Setting 0
to 5
6
Description 30 sec. 1 min. to 5 min. Disable
1
Setting
1 ................................... ................................240
Description
1 min. 240 min.
15
Setting 0
1........................... .......................240
Description Disabled
1 min. 240 min.
30