Service manual

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS

01.07.26

S-4

2. UTILITY MODE

• Utility Mode is used to make various settings according to the user’s need.

2-1. Settings in the Utility Mode

2-2. Utility Mode Setting Procedure

1. Hold down the Panel Reset key for 3 seconds.

2. Using the 10-Key Pad, enter the code corresponding to the desired subfunction.

Code No.: 1 to 5

3. Press the Start key.

• Press the Panel Reset key.

(1) User’s Choice Mode (Display: U-1)

• User’s Choice is used to make various settings according to the user’s need.

1. Settings in the User’s Choice Mode

Code No. Description

U-1 User’s Choice Mode

U-2 Drum Dehumidify Mode

U-3 Toner Replenisher Mode

U-4 Custom Size Input Mode

U-5 Administrator Mode

Code No. Function Code No. Function

C-1 Mixed Orig. C18 Density (ADF)

C-2 Paper Priority C19 Print Density

C-3 Copy Priority C20 Paper Auto Detection (1st Tray)

C-4 Density Priority C21 Paper Auto Detection (2nd Tray)

C-5 Density Level (Auto) C22 Paper Auto Detection (3rd Tray)

C-6 Density Level (Manual) C23 Paper Auto Detection (4th Tray)

C-7 Output Priority C24 Paper Auto Detection (5th Tray)

C-8 Crisscross Mode C25 Paper Size Detection (1st Tray)

C-9 4in1 Copy Order C26 Paper Type (1st Tray)

C10 Book Binding Position C27 Paper Type (Bypass Tray)

C11 Margin Setting C28 Special Paper Setting (1st Tray)

C12 Erase Setting (Left) C29 Special Paper Setting (2nd Tray)

C13 Erase Setting (Upper) C30 Special Paper Setting (3rd Tray)

C14 Erase Setting (Frame) C31 Special Paper Setting (4th Tray)

C15 Auto Panel Reset C32 Special Paper Setting (5th Tray)

C16 Energy Saver C33 Special Paper Setting

(Multiple Bypass Tray)

C17 Auto Shut OFF