Service manual

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-2
No. Name Description
1 Printer Lamp Lit while data received from personal computer is being
printed
2 Job Input key Press to select the Job Input mode. Two different jobs can
be programmed.
3 Meter Counter key Press to display the Total Counter or Size Counter value.
4 Neg.
↔
Pos. key Press to copy an original with the original total arrange-
ments reversed.
5 Original key Press to select the Mixed Orig. or Book Separation func-
tion.
6 Copy key Press to select the 2in1 or 4in1 function.
7 Erase key Press to select the erase position.
8 Finishing key Press to select the finishing function.
9 File Margin key Press to select the File Margin mode.
10 X/Y Zoom key Press to make a copy with different zoom ratios set for
X (horizontal) and Y (vertical) directions.
11 Job Recall key Press to recall either one of the two jobs previously stored
in memory.
12 Paper Misfeed indicator Lights up when a paper misfeed occurs in the copier.
Malfunction indicator Lights up when malfunction occurs in the copier.
13 Maintenance indicator Blinks or lights up when the time approaches that copier
needs maintenance service.
14 Add Paper indicator Lights up when paper source currently selected for use
runs out of paper.
15 Add Toner indicator Lights up when toner will soon run out.
16 Bypass Tray Size
Select key
Press to select the size of the paper loaded in the Bypass
Tr a y.
17 Zoom (
∧∨
) key • Press to change the zoom ratio in the range between
50 % and 200 % in 1 % increments.
• What is shown on the Display changes from the number
of copies to be made to the zoom ratio.
18 Display Shows the number of copies to be made, the zoom ratio,
and other setting data.
19 10-key Pad Use to type in the number of copies to be made and any
other numeric data.
20 Access key • Press when entering an account number.
• Becomes valid only when Copy Track has been set.
21 Energy Saver key Press to set the copies into the Energy Saver mode.
22 Interrupt key Press to interrupt a copy job.
23 Panel Reset key • Press to reset all copy functions and settings to their
defaults.
• Holding down the key for 3 seconds or more will set the
copies into the Utility mode.