Service manual

FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183

01.09.03

D-68

4-6. MISCELLANEOUS

(1) Remounting the EEPROM (U29)

NOTE

• When the Control Board (PWB-C) is replaced with a new one, EEPROM (U29) must be

demounted from the old PWB-C and remounted on the new PWB-C.

Remove the EEPROM (U29) from the new Control Board and mount the EEPROM (U29) of

the old Control Board to the new Control Board.

New EEPROM Old EEPROM

New Control Board Old Control Board

4022D031AA

NOTE

• Note the alignment notch marked with A on the

EEPROM (U29) when mounting the IC.

1171D049AA