Service manual

FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-51
4. ADJUSTMENT
4-1. ADJUSTMENT JIGS AND TOOLS USED
<Scanner/Mirrors Carriage Positioning Jigs> <Ds Collar Positioning Jigs>
<Db Gap Adjusting Jigs> <PC Positioning Jig>
4-2. TIMING BELT TENSION ADJUSTMENT
<Scanner Motor Timing Belt Adjustment>
4022D010AA
4022D011AA
4022D012AA
4022D030AA
1. Loosen three screws and move the Scanner
Motor Assy to the right or left to give tension to
the spring.
NOTE
• Give tension to the spring with the pulley in correct
mesh with the timing belt.
2. Using a torque driver, tighten the screws to a
torque of 2 kg
⋅
cm.
4022D032AA