Service manual

FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-20
(6) Cleaning of the Paper Dust Remover
(7) Cleaning of the Bypass Transport Roller
1. Remove the Imaging Unit.
2. Remove two screws, unplug one connector, and remove the Bypass Transport Roller
Assy.
1. Remove the Paper Dust Remover Assy.
2. Using a brush, whisk dust and dirt off the Paper
Dust Remover.
3. Using a soft cloth dampened with alcohol, wipe
the Bypass Transport Roller clean of dirt.
4. Using a soft cloth dampened with alcohol, wipe
the rolls clean of dirt.