Service manual

FrameMaker Ver.5.5E(PC) Di152/Di183 TROUBLESHOOTING
01.09.04
T- 5 5
(9) Smear on back
Section Step Check Result Action
Output
system
1 Toner is spilled over area inside copier. YES • Clean interior.
2 Toner is present along the paper path. YES • Clean.
3 Right Fusing Roller is dirty, scratchy, or
damaged.
YES • Clean or change.
4 Image Transfer Roller is dirty. YES • Clean or change.
5 Grid bias contact is dirty, scratchy,
deformed, worn, or damaged.
YES • Clean, correct, or
change.
NO • Change High Voltage
Unit (HV1).
• Change Master Board
(copier: PWB-A).