Service manual

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-17
Code No.
Setting (The default is ).
C-5
<Leading Edge Erase Adjustment>
Select whether to enable or disable the leading edge erase.
C-6
<Trailing Edge Erase Adjustment>
Select whether to enable or disable the trailing edge erase.
C-7
<Top/Bottom Edge Erase Adjustment>
Select the width of erase on the top and bottom edges.
C-8
<Loop Length Adjustment (1st Tray)>
Adjust the length of the loop formed before the Synchronizing Roller
when a skew or misfeed occurs. (1st Tray)
C-9
<Loop Length Adjustment (2nd Tray)>
Adjust the length of the loop formed before the Synchronizing Roller
when a skew or misfeed occurs. (2nd Tray)
C10
<Loop Length Adjustment (Bypass Tray)>
Adjust the length of the loop formed before the Synchronizing Roller
when a skew or misfeed occurs. (Bypass Tray)
C11
<Priority FLS Setting>
Set the size for FLS.
Highlighted
Setting
0 1 2 3 5
Description (mm)
05
4
Setting
0 1 2 3 5
Description (mm)
05
4
Setting
0 1 2 3 5
Description (mm)
05
4
Setting
0 ................................. .......................... 14
Description (mm)
-3.9 +3.9
7
Setting
0 ................................. .......................... 14
Description (mm)
-3.9 +3.9
7
Setting
0 ................................. .......................... 14
Description (mm)
-3.9 +3.9
7
Setting Description
0 330×203
330×210
2 330×216
3 330×220
4 337×206
1