User`s manual
English
Menu On/O Select Conrm Enter 0~9
57
System
Power Management
MENU Settings System Power Management
Setting Power Saving in Standby
You can minimise the standby power consumption
to below 1W.
1. Select
Power Saving in Standby.
2. Select
On to deactivate the certain features
and minimise the power consumption.
Note: When
Power Saving in Standby is
switched On the Time on the front display
will not appear when in standby, nor will
the Antenna Out loop-through the signal to
a connected device.
Setting Automatic Power Down
The receiver automatically enters standby mode for power saving if no user interaction occurs for 3 hours.
1. Select
Automatic Power Down.
2. Select
On to enter standby mode automatically if no user interaction occurs for 3 hours.
Note: The message will be displayed before entering standby mode. If no selection is made for 30
seconds, the receiver enters standby mode automatically.
Common Interface
MENU Settings System Common Interface
The common interface information is displayed.