User`s manual
English
Menu On/O Select Conrm Enter 0~9
55
Installation
Antenna Power
MENU Settings Installation Antenna Power
Active antenna is a portable or indoor antenna which needs power supply from the product because it
does not have power cord for itself. Connect an active antenna to the
ANTENNA IN on the rear of the
product.
1. Select 5V Antenna Power
.
2. Select an option.
On: 5V power is supplied from the active antenna
cable.
O: No power supplied
Note: Most domestic aerial installation will not
require the Antenna Power option to be
switched on. Please check with your aerial
installer if this is required for your aerial.
Factory Default
MENU Settings Installation Factory Default
1. Select
Factory Default.
2. A popup will appear. Select
Ye s .
3. You will be prompted to enter the password.
Enter the password.
Note:
• The default password is 0000. If you have
forgotten your password, please contact
Humax Customer Support.
• To format the HDD, mark
Format HDD.
Warning:
• Please note that once you perform Factory
Default, all user conguration/settings will be reset to the Factory settings. After completing the
factory default, the installation wizard will appear automatically in a few seconds.