User`s manual
English
Record Select Conrm Enter 0~9
33
Recording and Playback
Setting Padding / Jump Time
MENU Settings Preferences Recording
Setting Padding Time
You can set the recording padding time in case
the recording starts earlier or ends later than
scheduled.
Start Padding Time : Additional recording time
before the recording starts.
End Padding Time : Additional recording time
after the recording ends.
Setting Jump Time
You can set the jump time to replay or skip scenes
during playback or time shifted recording.
Instant Replay Time : 7 sec, 15 sec, 30 sec
Skip Forward Time : 30 sec, 60 sec, 120 sec, 240 sec
Note:
• You can record radio programmes also.
• The record banner will be displayed with the i-plate whenever pressing the
i button.
• You can change the recording duration by using the
RECORD button for instant recording or by going
to
MENU > TV Guide > Schedule for scheduled recording.
• When a new scheduled recording starts while a recording is already in progress, the record banner
will be displayed for a few seconds to inform you that the recording has been started. If you are not
watching the channel being recorded, a record notice will pop-up 30 seconds before the scheduled
recording starts, and the channel will switch to the scheduled programme automatically at the start
time.
• Pressing the
STANDBY button while recording will not stop the recording. New recordings will start
even in standby mode.
• While watching a recording programme, you can trick-play using the playback control buttons such as
pause, fast rewind, instant replay, slow, etc.
• You can record the digital TV or radio programmes only. The external AV inputs cannot be recorded.
• Make sure that there is enough free space before recording. If the free space on the hard disk drive is
insucient, recording will stop. Recording HD programme requires more space than SD programme.
Recording one hour of HD and SD programmes may require 8 GB and 2~3 GB of hard disk space,
respectively. The space for recording one hour programme may dier depending on the programme.
• To view the recorded programme list, press the
MEDIA or MENU button and select Video. (Refer to
Using Video List.)