7664-4004-12 CF1501/CF2001
Energy Star® As an ENERGY STAR® Partner, we have determined that this machine meets the ENERGY STAR® Guidelines for energy efficiency. *The ENERGY STAR® Guidelines are not met if printer controller Fiery Z4 is installed. What is an ENERGY STAR® Product? An ENERGY STAR® product has a special feature that allows it to automatically switch to a “low-power mode” after a period of inactivity.
Contents 1 2 Introduction 1.1 We Want You to Be a Satisfied Customer ..................................1-1 1.2 SAFETY INFORMATION................................................................1-1 Warning and Precaution Symbols...................................................1-2 Meaning of Symbols........................................................................1-2 WARNING.......................................................................................1-2 CAUTION .........................
Care of copier supplies................................................................... 2-4 Storage of copies............................................................................ 2-5 2.3 3 ii Legal Restrictions on Copying.................................................... 2-6 Before Making Copies 3.1 Available Features........................................................................ 3-1 3.2 Components and Their Functions .............................................. 3-6 3.
Turning On the Copier...................................................................3-30 Default Settings.............................................................................3-30 4 5 Copy Paper 4.1 Paper Specifications.....................................................................4-1 Paper Types....................................................................................4-1 Paper Sizes.....................................................................................
Manual Feeding (“12-1/4 × 18” Paper) ......................................... 5-14 To make copies using manual feeding (“12-1/4 × 18” paper)....... 5-14 6 7 Basic Operations 6.1 Making Copies .............................................................................. 6-1 To copy a document (To make a basic copy)................................. 6-1 6.2 Selecting the Paper Source ......................................................... 6-4 To select the paper source before copying ................
.2 Finishing (“Sort” and “Group” settings) ....................................7-8 Non-Sort:.........................................................................................7-8 Sort:.................................................................................................7-8 Group: .............................................................................................7-9 Sorting/Grouping ...........................................................................
9 vi Utility Mode Operations 8.1 Resetting the Copier (“Default Settings” Function).................. 8-1 To specify the default settings ........................................................ 8-1 8.2 Viewing Counters (“Meter Count” Function) ............................. 8-2 To view the meter counts ............................................................... 8-3 8.3 Storing and Recalling Jobs (“Job Memory Input” Function) ... 8-4 To store a job...............................................
To change the Expert User’s Mode settings .................................9-20 To set the “Thick Paper and OHP Film Image Density” parameter......................................................................................9-22 To set the “Color Shift Correction” parameters ............................. 9-23 To set the “Stabilizer” parameter................................................... 9-26 To set the “PRT Area (Top Margin)” parameter ............................
.9 Other Messages........................................................................ 10-44 11 Troubleshooting 11.1 When Incorrect Copies are Produced ...................................... 11-1 11.2 When the Copier Is Not Operating Correctly ........................... 11-3 12 Appendix 12.1 Specifications ............................................................................. 12-1 Copier CF1501/CF2001 ...............................................................
1 Introduction 1 Introduction 1.1 We Want You to Be a Satisfied Customer Thank you for choosing a Minolta CF1501/CF2001. To ensure the best performance and effective use of your copier, this manual will provide information on the following topics: G Getting to Know Your Copier. G Initial Steps . . . G Settings for Making Copies. G Setting the Utility Mode. G Troubleshooting. Please read this manual carefully before using your copier and keep it handy at all times.
1 Introduction Warning and Precaution Symbols Ignoring this warning could cause serious injury or even death. WARNING: CAUTION: Ignoring this caution could cause injury or damage to property. Meaning of Symbols A triangle indicates a danger against which you should take precaution. This symbol warns against possible electrical shock. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action.
1 Introduction • Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. • In principle, do not use an extension cord.
1 Introduction CAUTION • Do not use flammable sprays, liquids, or gases near this product, as a fire could result. • Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health. • Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction.
1 Introduction Precautions for Routine Use • Do not store toner units, PC drum units, and other supplies and consumables in a place subject to direct sunlight and high temperature and humidity, as poor image quality and malfunction could result. • Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct sunlight. If the PC drum is exposed to intense light, poor image quality could result. • Do not unpack a toner unit or PC drum unit until the very time of use.
1 Introduction USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users) NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
1 Introduction Ozone Release Locate the machine in a Well Ventilated Room A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy and safe operating environment, it is recommended that the room be well ventilated.
1 Introduction LED Radiation Safety This product is a copier which operates by means of a LED (light emitting diodes) exposure system. There is no possibility of danger from the LED optical radiation, because the LED optical radiation level does not exceed the accessible radiation limit of class 1 under all conditions of operation, maintenance, service and failure. 1.3 Guide to Manuals Enclosed Manuals The manuals listed below are enclosed with this copier.
1 Introduction Note (*May also appear as “Important” or “Tip”) Text highlighted in this manner contains useful information and tips to ensure safe use of the copier. 1 The number 1 as formatted here indicates the first step of a sequence of actions. 2 Subsequent numbers as formatted An illustration inserted here shows what operations must be performed. here indicate subsequent steps of a sequence of actions. formatted in this style pro? Text vides additional assistance.
1 1.4 Introduction Explanation of Basic Concepts and Symbols The use of words and symbols in this manual are explained below. Paper Feeding During printing, paper is supplied from the right side of the copier and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below.
1 Introduction “Width” and “Length” Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as “A” in the illustration) and the second to the length (shown as “B”). Paper Orientation Lengthwise ( ) If the width (A) of the paper is shorter than the length (B), the paper has a vertical or portrait orientation, indicated by either “L” or .
1 1.5 Introduction Features The Minolta CF1501/CF2001 is a high-speed, high-quality full-color copier/printer, combining the functionality and compactness best suited for any office.
2 Precautions 2 Precautions 2.1 Installation Precautions Installation site To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements. - A location away from curtains, etc.
2 Precautions Space requirements To ensure easy copier operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. 55 (1,397) 20 (510) 10-3/4 (275) 48 (1,222) 8-1/4 (210) 31 (787) 4 (100) 58-1/4 (1,477) 11-1/4(285) 47 (1,192) 67-1/4 (1,707) Unit: inch (mm) Note Be sure to allow a clearance of 4 in. (100 mm) or more at the back of the copier for the ventilation duct.
2 Precautions 2.2 Operation Precautions Operating environment The environmental requirements for correct operation of the copier are as follows. G Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour G Humidity: 25% to 85% with fluctuations of no more than 20% within an hour Proper use To ensure the optimum performance of the copier, follow the precautions listed below. - Never place heavy objects on the original glass or subject it to shocks.
2 Precautions CAUTION If the ventilation duct at the top of the copier becomes blocked, the inside of the copier will accumulate heat, resulting in a malfunction or fire. § Do not place any objects over the ventilation duct. CAUTION The area around the fusing unit is extremely hot. § Be careful not to touch any parts around the fusing unit, other than those indicated in this manual, in order to reduce the risk of burns.
2 Precautions CAUTION Precautions for handling toner: § Be careful not to spill toner inside the copier or get toner on your clothes or hands. § If your hands become soiled with toner, immediately wash them with soap and water. § If toner gets in your eyes, immediately flush them with water, and then seek professional medical advice. Storage of copies Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading.
2 2.3 Precautions Legal Restrictions on Copying Certain types of documents must never be copied with the purpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible copying.
Before Making Copies 3 Before Making Copies 3.1 Available Features 3 The main copy settings available with this copier are listed below. For details on their operation, refer to the pages indicated. Orig. Ö Copy (Refer to page 7-1.
3 Before Making Copies G Double-Sided Ö Double–2in1 4 4 3 G Book Ö Separation G Book Ö Spread Note The “Double-Sided” Original setting is only available if the duplexing document feeder is installed. The “Double-Sided” and the “Double–2in1” Copy settings are only available if the duplex unit and the memory are installed. Zoom settings (Refer to page 6-14.) G Reduced/Full Size/Enlarged Finishing (Refer to page 7-8, page 7-12, and page 7-15.
3 Before Making Copies “Group” setting “Staple” setting H (Front staple) H (Rear staple) 2 2 2 3 3 3 3 2 G 1 1 1 1 1 2 3 1 G H G 1 2 3 1 1 2 3 1 (Double stapling) “Hole-Punch” setting 1 2 3 1 2 3 Note The “Sort” and “Group” settings are only available if the 10-mailbin sorter is installed. The “Staple” and “Hole-Punch” settings are only available if both the finisher and the printer controller are installed, and the print job is sent from the computer.
3 Before Making Copies Applications 3-4 G “OHP Interleaving” function (Refer to page 7-30.) G “Frame Erase” function (Refer to page 7-19.) G “Mirror Image” function (Refer to page 7-21.) G “X/Y Zoom” function (Refer to page 7-32.) G “Postcard” function (Refer to page 7-33.) G “Image Repeat” function (Refer to page 7-35.
3 Before Making Copies Note The “X/Y Zoom”, “Postcard” and “Image Repeat” functions are only available if the memory is installed. “Mixed Orig Detection” function (Refer to page 7-17.) G Mixed originals 1 1 2 3 1 2 3 2 3 Note The “Mixed Orig Detection” function is only available if the duplexing document feeder is installed.
3 3.2 Before Making Copies Components and Their Functions The following describes each of the units that the copier is composed of as well as their functions.
Before Making Copies G 10-Mailbin sorter JS-1002 (optional) When printing from the computer, automatically sorts or groups pages and feeds them into the mailbin specified at the computer G Finisher FN-107/FN-108 (optional) When printing from the computer, finishes pages according to the mode (sorting, grouping, stapling or hole-punching) selected at the computer, then feeds out the pages G Duplex unit AD-14 (optional) Automatically turns over copies, allowing double-sided copies to be made CF1501/CF20
3 3-8 Before Making Copies G Paper feed unit PF-118 (optional) Can supply 500 sheets of paper; up to two paper feed units can be installed G Large-capacity cabinet PF-117 (optional) Can supply 2,500 sheets of paper G Copier stand (optional) Decreases the equipment area by installing the scanner above the copier G Copy desk (optional) Used when the optional 10-mailbin sorter (JS-1002) or an optional finisher (FN-107/FN-108) is installed without an optional paper feed unit G Copy table (optional) U
Before Making Copies 3 G Printer controller Fiery X3e (optional) Internal printer controller that allows the copier to be used as both a color printer and a color scanner on a network G Printer controller Fiery Z4 (optional) Allows the copier to be used as a color printer or color scanner configured into a computer network; provides higher productivity than printer controller Fiery X3e and enables use as a multifunctional printer G Memory (256 MB: 128 MB × 2) M128-2 (optional with CF1501; standard in
3 Before Making Copies 3.3 Parts Names and Their Functions Outside of Copier 1 6 2 7 3 8 4 9 5 10 12 13 14 15 18 17 16 11 19 20 21 22 * The original cover, copier stand, and copy desk shown installed in the illustration are optional.
3 Before Making Copies No. Part Name Description 1 Copy output tray Holds copies fed out of the copier 2 Toner supply door Opened when adding toner 3 Front door Opened when replacing the imaging unit See p. 10-43. 4 1st drawer Holds 250 sheets of paper The paper size can be adjusted freely. Special paper can be used. See p. 4-7. 5 2nd drawer Holds 500 sheets of paper The paper size can be adjusted freely. See p. 4-13. 6 Power switch Used to turn the copier on and off See p. 3-29.
3 Before Making Copies Inside of Copier 1 4 2 3 3-12 No.
3 Before Making Copies Supplies and Parts 1 3 2 4 5 7 8 6 9 No.
3 Before Making Copies Duplexing Document Feeder (Optional) 1 2 3-14 3 4 5 No. Part Name Description 1 Document output tray Collects documents that have been copied 2 Document guide Align one side of the document along the fixed document guide, and then adjust the other guide to the width of the document. See p. 5-4. 3 Document feed tray Load the documents to be copied face up. See p. 5-4.
3 Before Making Copies Duplex Unit (Optional) 1 No.
3 Before Making Copies 10-Mailbin Sorter (Optional) 3, 4 1 2 No.
3 Before Making Copies Finisher (Optional) 2 1 3 4 5 No.
3 Before Making Copies Paper Feed Unit (Optional) 1 2 No. 3-18 Part Name Description 1 3rd drawer 2 4th drawer Holds 500 sheets of paper The paper size can be adjusted freely. As many as two units can be installed. See p. 4-13.
3 Before Making Copies Large-Capacity Cabinet (Optional) 1 No. Part Name Description 1 3rd drawer Holds 2,500 sheets of paper See p. 4-15. Printer Controller Fiery Z4 For more details, refer to the manual of the printer controller. Printer Controller Fiery X3e For more details, refer to the manual of the printer controller.
3 3.4 Before Making Copies Names of Control Panel Parts and Their Functions Names of Control Panel Parts and Their Functions 14 13 15 1 12 11 10 2 9 3 4 3-20 5 6 7 8 No. Part Name Description 1 Touch panel contrastadjusting dial • Adjusts the contrast of the touch panel 2 Utility key • Press to display the Utility screen, which allows you to select the following functions: Default Settings Meter Count Job Memory Input User’s Choice Administrator Mode Scanner Addr.
3 Before Making Copies No. Part Name Description 6 Start key • Press to start the copy operation. • If this key is pressed while the copier is warming up, the copy job is delayed until the copier is finished warming up. See p. 3-26. • The [Start] key indicator lights up in green to indicate that the copier can begin copying. The [Start] key indicator lights up in orange to indicate that the copier cannot make copies. 7 Stop key • Press to stop a continuous copy operation.
3 3.5 Before Making Copies Using the Touch Panel Description of Touch Panel When the copier is turned on (1), the Basic screen appears in the touch panel. It shows, with messages and graphics, the currently selected settings, the settings that are available, and the copier status. Note The screen illustrations in this manual may be slightly different from the screens that appear on your copier’s touch panel.
3 Before Making Copies No. Part Name Description 1 Screen tabs These are the tabs for the Basic, Orig. Ö Copy, Finishing, and Auxiliary screens. Touch a tab to display the corresponding screen. Example) The Auxiliary screen is selected above. * Touch “Basic” to display the Basic screen (the default screen). 2 Message display The current copier status, operating instructions, warnings/ precautions, and other data including the number of copies selected are displayed here.
3 Before Making Copies Operating the Touch Panel To activate a function or to select a setting, lightly touch the desired function or setting shown on the touch panel. CAUTION Be careful not to damage the touch panel. § Never push on the touch panel, and never push on it using a hard or pointed object.
Before Making Copies 3.6 3 Useful Operations Cancelling Settings Press the [Panel Reset] key to cancel all modes and functions (zoom ratio, number of copies, etc.) and reset them to their defaults. (All selected settings are cancelled.) If the duplexing document feeder is being used and a document has been fed onto the original glass, the document will automatically be fed out. Tip Pressing the [Panel Reset] key is the easiest way to cancel all selected settings at one time.
3 Before Making Copies Energy Saver Mode Instead of turning off the copier, it can be put into a standby mode (Energy Saver mode). Turn the Energy Saver mode on by pressing the [Energy Saver] key. In addition, if the copier is not used for a set length of time, it automatically enters Energy Saver mode. The default length of time is 15 minutes. To cancel Energy Saver mode, press any key in the control panel.
Before Making Copies 3 Interrupting Copy Jobs During long continuous copy operations or print jobs, the copier may be needed to quickly copy a different document. To interrupt a copy job § Press the [Interrupt] key to temporarily stop the current copy operation. Press the [Interrupt] key again to continue the previously stopped copy operation. Note The Interrupt mode is also cancelled when the copier automatically resets itself 1 minute after the last key is pressed (“Auto Panel Reset” parameter).
3 Before Making Copies Access Codes If access codes have been specified, use of the copier can be limited to certain people or to a specified number of copies for each account. Note If access codes have been specified, the copier cannot be used unless the access code/account number is entered first. The access codes can be specified using the “Copy Track” function of the Administrator mode. (Refer to page 9-1.
Before Making Copies 3.7 3 Power Switch and Default Settings Turning the copier on and off To turn the copier on § Set the power switch to “1”. To turn the copier off § Set the power switch to “2”. Note Do not turn off the copier while it is making copies, otherwise a paper misfeed may occur. Make sure that all copy operations are finished before turning off the copier.
3 Before Making Copies Turning On the Copier A few seconds after the copier is turned on, the indicator on the [Start] key lights up in green and the message “Warming up. Pre-program a job.” appears on the touch panel. At this time, a delayed copy job can be specified. (For more details, refer to page 3-26.) However, even though the [Start] key is pressed, the copy operation is not performed until the copier has finished warming up (after about 5 minutes at normal room temperature (68°F/20°C)).
