User`s guide

bizhub C360/C280/C220 5-23
5.3 Windows 2000
5
9 In the [Printer Name or IP Address:] box, enter the IP address for the machine, and then click [Next >].
% If the [Additional Port Information Required ] dialog box appears, go to Step 10.
% If the [Finish] page appears, go to Step 13.
10 Select [Custom], and then click [Settings...].
11 Change the settings according to the port, and then click [OK].
% For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box.
% You must discriminate between upper and lower case letters when entering it.
% For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port
Number:] box.
12 Click [Next >].
13 Click [Finish].
[Add Printer Wizard] appears.
14 Click [Have Disk...].
15 Click [Browse...].
16 Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used. Selecta-
ble printer drivers:
PCL driver, PS driver and fax driver
17 Click [OK].
The [Printer:] list appears.
18 Click [Next >].
19 Follow the instructions on the pages that follow.
20 Click [Finish].
% If the [Digital Signature] window appears, click [Yes].
21 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
22 Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.