User`s manual

4-15
4. USING SC-210 AS A SCANNER
To operate the SC-210 at optimum speed, the following
minimum requirements are recommended:
• IBM compatible PC 386/486, Pentium or later;
• Microsoft Windows 95/98/Me, Windows NT;
• One printer port available: ECP or EPP (enhanced
parallel port);
• 20 Megabytes of available hard disk space for
installation;
• 16 Megabytes of RAM (32 Megabytes or higher
recommended);
• A video graphics array (VGA) monitor;
• A Microsoft Windows-compatible pointing device (e.g.,
mouse);
• A CD-ROM drive.
4.1 INSTALLATION PROCEDURE
Installation procedures of the SC-210 driver and utilities are as
follows:
1. Start Windows 98/95/Me, or NT 4/Windows 2000.
2. Insert the Utilities and Documentation CD-ROM into your
CD ROM drive.
3. The CD-ROM will autolaunch on most systems. However, if
you system does not support autolaunching CD-ROMs,
press the Start button, choose RUN, type d:\driver\SC-
210.exe (d: the CD-ROM drive in use), and then click OK.
(See Figure 3-1,3-2)
4. Follow the on-screen instructions to complete the
installation.