User`s manual

-3-14
3.4.10 AUTOMATIC POWER SAVING
The SC-210 features automatic power saving without unplugging the
power cable. If you have not used the SC-210 over a selected power-
saving interval (15 minutes, 2 hours, or 4 hours), it automatically turns
into power saving status.
To resume the ready status, press any one of the buttons on the
Control Panel. The Message Window displays “Warming up…” and
then “1 Copy @100%”, the ready status. The Ready LED now turns
steadily on.
The SC-210 can also have the power saving mode disabled entirely.
To change the SC-210 power saving mode, press the Menu button
and select Sleep. Using the “s” button or the “t“ button, display the
setting that you want to select. Once your desired choice is
displayed, press the Select button to select your choice.