User`s manual

3-13
3.4.9 MAKING COPIES OF A 3D OBJECT
The Minolta-QMS SC-210 solution improves your copy reproduction
significantly and even makes 3D object copies amazingly clear.
The Operating Steps:
1. Place your 3D object on the document glass.
2. Press the “Normal/Quality” button and the Message Window
displays “Normal mode”.
3. Repress the “Normal/Quality” and the Message Window displays
“Quality mode”.
4. Press the Copy button. Your 3D object copy is done.
The 3D copy The 3D copy
using a normal copier using the Minolta-QMS SC-210