User`s manual

3-9
3.4.4 CHANGING YOUR COPY DENSITY
Copy density refers to the degree of darkness that the Minolta-QMS
SC-210 has reproduced. There are times when your original is
unsatisfactorily darker or lighter. Use the density feature to
compensate for an unsatisfactory original.
The Operating Steps:
1. Place your original face down on the document glass.
2. Press the “Lighter/Darker” button. The Message Window
displays the default degree of darkness.
3. Repress the “Lighter/Darker” button to select one of the other
levels. Or you may press the “s” to increase the level, press the
“t” button to decrease the level.
4. Press the Copy button. Your printout shows the darkness or
brightness has been compensated.
3.4.5 CHANGING COLOR INTENSITY
Color intensity refers to the saturation of color reproduced by SC-210.
There are times when the saturation of the original image doesn’t fit
your preference. Use this option to increase or decrease the color
saturation.
The Operating Steps:
1. Place your original face-down on the document glass.
2. Press the “Color Intensity” button. The Message Window
displays the default saturation.
3. Repress the “Color Intensity” button to select one of the other
levels. Or you may press the “s” to increase the level, press the
“t” button to decrease the level.