Installation guide

5
Troubleshooting
5-2
Inside the Printer
Remove the misfed sheet of paper by pulling it in the direction indicated
by the arrow.
CAUTION
The fusing unit can become very hot!
Ü The fusing unit inside the printer can become very hot during
operation. Do not touch the area to avoid injury.
Ü Do not touch the image transfer roller.
Solving Print Quality Problems
l Remove the imaging cartridge and gently shake it a few times to
distribute remaining toner.
l Remove the imaging cartridge and check it for damage. Replace the
imaging cartridge with a new one if necessary.
l Clean the inside of the printer.
For more details, refer to the “Troubleshooting” and “Maintenance”
sections of the Online User’s Manual.
No Output
l Make sure that the printer is plugged in.
l Make sure that power is turned on.
l Make sure that you are using the correct type of interface cable
l Make sure that your computer’s communication port settings are
correct.
For more details refer to the Online User’s Manual.