Installation guide

3
Installing the printer driver
3-2
General printer driver information
The printer driver is supplied on a CD-ROM along with the printer. If your
computer has no CD-ROM drive, you may download the printer driver
from the Internet.
You may find the latest version of the printer driver under the address
http://www.minolta-qms.com.
Information on installation using Plug-and-Play or Add Printer
Wizard
We recommend to use the Software and Documentation CD-ROM´s
installer. If you install the printer driver using Plug-and-Play or the Add
Printer Wizard, you should note these points:
l The Driver directory on the Software and Documentation CD-ROM
must be specified.
l The Status Display and Driver Help will not be installed.
l The auxiliary program for deinstallation will not be installed. To use this
auxiliary program, start the file “zuninst.exe” on the Software and
Documentation CD-ROM that is supplied with your printer.
Information on installing a network printer
.
Local printer or network printer?
The printer can be equipped with an optional network card if required.
Contact your local vendor.
You can install the printer as a local printer or as a network printer. You
should make note of the following points when installing as a network
printer:
l We recommend consulting your network administrator and referring to
the Network Interface Card User´s Manual on the Software and
Documentation CD ROM.
l Server Install is not available under the following circumstances:
m A Windows NT4.0 server and a Windows 2000 client
m A Windows 2000 server and a Windows NT4.0 client