Installation guide

Unpacking and setting up
2
2-19
Connecting the printer to a computer (USB port)
When connecting the PagePro 4110W printer to your computer with a
USB cable, you must first install the PagePro 4110W USB device driver
before you install the printer driver.
.
Note
In the following procedures it is assumed that you are installing the
PagePro 4110W USB device driver on your computer for the first time.
This printer can be connected with a USB cable only if your computer is
running Windows 98, Windows Me, or Windows 2000.
Installing the USB device driver for Windows 98 or Windows Me
.
Note
The screen images shown in this section are examples of the
installation for Windows 98. The screen images may differ slightly for
Windows Me.
1
Switch on your computer and start Windows 98 or Windows Me.
2
Switch on the printer. Do not yet connect the USB cable.
3
Check that Windows 98 or Windows Me has finished loading and that
the printer is ready.
4
Insert the Software and Documentation CD-ROM supplied with your
printer into your computer’s CD-ROM drive.
5
When the CD-ROM installation screen appears, close it.
6
Connect the printer to the
computer with the USB cable.