Installation guide

Unpacking and setting up
2
2-17
Printing a configuration page
Print a configuration page in order to make sure that the printer is
functioning properly.
1
Make sure that correct media is placed in paper feed tray 1.
2
Hold down the [CONTROL BUTTON] for more than 15 seconds until
the “Toner empty” and “Ready” indicators flash as shown below.
After the control button is released, the Configuration Page is printed.
.
Be well prepared for technical queries.
Please have a current configuration page available when calling for
technical assistance. Make a note of the Serial No. of your printer on
the configuration page, see page 1-6 (laser safety label).