Installation guide

1
Introduction
1-10
This device must be used with a shielded interface cable and shielded
network (10BaseT/100baseTX)cable. The use of non-shielded cables is
likely to result in interference with radio communications and is prohibited
under FCC rules.
The design and production of this unit conform to FCC regulations, and
any changes or modifications must be registered with the FCC and are
subject to FCC control. Any changes made by the purchaser or user
without first contacting the manufacturer will be subject to penalty under
FCC regulations.
Interference-causing Equipment Standard (ICES-003 ISSUE 3)
Warning (for users in Canada)
This Class B digital apparatus complies with Canadian standard
ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
Ozone emission
Small quantities of ozone escape during the printing process. These
quantities do not represent a health hazard. In spite of this, you should
take care that the area in which the machine is located has adequate
ventilation, especially when you are printing large quantities of materials
or whether the machine is being used continuously over a long period of
time.