User`s guide

2
Setting up the printer
2-8
❍ If you installed an optional face-
up tray and you want the sheets
to come out face up, then open
the face-up tray instead of the
face-down tray, and set the
face-up/face-down selection
switch as shown.
Loading paper in the manual feed tray
1
Make sure that the tray cover is properly attached to Tray 1.
2
Open the paper guides.
3 Insert a sheet of paper as far as
possible into the manual feed tray
withthesidetobeprintedfacingup,
and then adjust the paper guides so
that both sides of the paper are se-
cure.
?
How many sheets may I place in
the tray?
➜ Load only one sheet of paper at
atime.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]