User`s guide

Maintaining the printer
10
10-11
10.3 Cleaning the printer
Clean the printer at regular intervals to prevent dust, dirt ,and paper resi-
due from accumulating in and on the printer.
Cleaning the outside of the printer
1
Turn off the printer and disconnect the power cord.
2
Wipe the outside of the printer with a soft cloth. You may moisten the
cloth with a little neutral household cleaner.
Cleaning the paper feed roller
Clean the paper feed roller if media feed problems occur frequently.
WARNING
The fusing unit can become very hot!
The fusing unit, which is located beneath the top cover, can become very
hot when the printer is in operation.
➜ To prevent injuries, avoid contact with this area.
➜ After turning off the printer, wait at least 10 minutes before cleaning the
inside of the printer.
1
Turn off the printer and disconnect the power cord.
2
Close the face-down tray.
Fusing unit
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]