User`s guide

10
Maintaining the printer
10-6
2
While holding down the panel button, turn on the printer.
The green “Ready” indicator begins to blink.
3
Continue holding down the panel button, and the green “Ready” indi-
cator starts to blink.
4
After the green “Ready” indicator has blinked for about 5 seconds, re-
lease the panel button.
Both indicators begin to blink.
5
After confirming that both indicators are blinking, press and hold down
the panel button again for at least 5 seconds.
Both indicators light up for about 5 seconds, and then both indicators
begin to blink again.
The counter for the toner cartridge has now been reset.
6
Turn the printer off and then on again.
Once the green “Ready” indicator remains on, the printer is again in
Stand-by mode.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]