User`s guide

Working with the printer
8
8-5
Continuing a print job after an error message
You can continue the print job after correcting the following types of errors:
✔ When the print job is too complex and the memory capacity of the
printer is inadequate
✔ When there is no more paper in the trays
✔ When paper of a different format than that set in the printer driver was
fed into the printer
1
Check that one of the above errors has occurred.
2
Press the panel button to operate the media feed.
The print job continues.
✎
Check your printed document!
If you have continued a print job after an error message, be sure to
check your printed document. Not all pages may have printed.
Cancelling a print job
You can cancel a print job that is currently being processed.
1
While data is being processed or printed (the green “Ready” indicator
is blinking), hold down the panel button for more than 5 seconds.
2 Release the panel button after both indicators light up.
The current print job has now been cancelled.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]