User`s guide
/
/
}¥¥
/
CALS (Computer-aided Acquisition and Logistics Support) is a comprehensive
specification spelled out in an array of MIL specifications. Some specifications of
CALS include Standard Generalized Markup Language (SGML), for text data; Initial
Graphics Exchange Specification (IGES), for vector graphics; CCITT Group 4, for
raster graphics; and Computer Graphics Metafile (CGM), for vector and raster
graphics.
This documentation uses the name “CALS” to refer to the CCITT Group 4 MIL-R-
28002 specification, which defines the requirements for raster graphics representation
in binary format.
x×Â@Î
Use the Administration/Emulations/CALS menu to configure the CALS emulation. This
menu has the following submenus. Each is explained in detail in this section. (For
information on changing configuration menu settings, see your printer documenta-
tion.)
Auto Rotation—Allows the image to be automatically rotated 90
°
, 180
°
, or 270
°
.
Auto Scaling—Allows the image to be automatically scaled to fit the selected
paper size.
Version—Identifies the CALS and ImageServer versions.
»Note:
The Version submenu is not available on the 2060, 2425, 3260, 4032, 4060,
magicolor 2, magicolor 2+, magicolor 330, or magicolor 6100. A PostScript file on
the printer’s hard disk also contains the ImageServer version number. Remote
users can retrieve the sys:/bin/emulate/isver.ps file via ftp and then either look at it
or print it to get the current ImageServer version.
Each submenu, except Version, has a comparable Document Option Command
(DOC), which overrides the configuration menu setting. (For more on DOC, see the
Crown Document Option Commands
manual, available from your vendor.)
»Note:
The ImageServer Option must be installed before it can be configured. If it has
not been factory installed, refer to chapter 2, “ImageServer Installation,” for installation
instructions.