User`s guide

Loading the

Paper Trays

QMS 4060 Print System Getting Started2-52

cally pulls paper from the tray. Loading paper in the tray involves the

following steps:

n Opening the tray

n Setting the correct paper size for the tray (if necessary) and paper

size indicator

n Loading paper in the tray

n Closing the tray

» Note:

Ensure that the tray size matches the paper size (for example,

letter paper must be loaded only when the tray is set to letter size).

Since the paper tray sends a paper size signal to the printer

controller, using a wrong size paper will cause jamming or the image

positioned incorrectly on the page.

Setting Up the Paper Size for a Paper Tray

» Note:

All three paper trays are set up for letter-size printing from the

factory. If you need to configure the trays for any other paper size,

then follow this procedure. Otherwise, go ahead to the next section.

1 Open the tray that you wish to change paper size.

2 Locate the blue locking thumbscrews in the paper tray.

Locking

Thumbscrew

Paper Guides