User`s guide

3000-Sheet
Large-Capacity
Output Stacker
QMS 4060 Print System Getting StartedC-44
1 Plug the interface cable from the LCOS into the connector on
the back of the printer near the bottom.
2 Plug one end of the power cable into the LCOS and the other
end of the cable into a grounded outlet.
3 Turn on the LCOS power switch.
The power switch is on the lower-front of the LCOS. It takes a few
seconds for the LCOS to perform power-up diagnostics.
4 Turn on the printer.
Top
view
Side
view
Interface connecto
r
Interface cable
Power cable socket