User`s guide

Media Types14
Do not use thick stock that is
!
Mixed with any other media in the media trays (as this will cause media
jams)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
Use envelopes that are
!
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"#
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
!
Dry
!
Printed on the front address side only
Do not use envelopes that have
!
Self-sticking flaps
!
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for
sealing
!
Transparent windows
!
Too rough of a surface
!
Material that will melt, vaporize, offset discolor, or emit dangerous fumes
!
Been presealed
Capacity Tray 1 Up to 10 envelopes, depending on their thickness
Orientation Face up
Type Check http://printer.konicaminolta.net/support (click on
"Answer Base") for currently approved media.
Driver
Media Type
Envelope
Weight 25–43 lb bond (91–163 g/m²)
Duplexing Not supported