User`s guide

Media Types
13
!
Dusty
!
Wet (or damp)
"#
Keep media between 35% to 85% relative humidity. Toner does
not adhere well to moist or wet paper.
!
Layered
!
Adhesive
!
Folded, creased, curled, embossed, warped, or wrinkled
!
Perforated, three-hole punched, or torn
!
Too slick, too coarse, too textured
!
Different in texture (roughness) on the front and back
!
Too thin or too thick
!
Stuck together with static electricity
!
Composed of foil or gilt; too luminous
!
Heat sensitive or cannot withstand the fusing temperature (356°F/180°C)
!
Irregularly shaped (not rectangular or not cut at right angles)
!
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
!
Acidic
!
Any other media that is not approved
Thick Stock
Paper thicker than 24 lb (90 g/m
2
) bond is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity Tray 1
Up to 50 thick stock sheets, depending on their
thickness. Thick stock is supported only in letter,
A4, or smaller media sizes.
Orientation
Face up
Type
Check http://printer.konicaminolta.net/support (click on
"Answer Base") for currently approved media.
Driver
Media Type
Thick stock
Weight
25–43 lb bond (91–163 g/m²)
Duplexing
Not supported
Notes
43 lb (163 g/m²) bond is also referred to as 90 lb index stock.