User`s guide
,QWURGXFWLRQ
4063ULQW6\VWHP*HWWLQJ6WDUWHG
,QWURGXFWLRQ
The QMS CrownNet Ethernet interface is a combination of hardware
and host software that allows your printer to be connected to an
Ethernet network that supports the following:
The instructions given in this chapter are the minimum steps needed
to get your printer up and printing. For complete installation informa-
tion refer to the
QMS CrownNet Setup Guide
. For information on con-
figuring the CrownNet interface and using the CrownNet software
(CrownAdmin, CrownAdmin 3, CrownNet Manager, the Print Monitor,
and Crown View), refer to the
QMS CrownNet System Administrator’s
Guide
. These manuals are found on the
Software Utilities
CD-ROM.
2YHUYLHZ
1 Connect the printer to the network.
2 Install the CrownNet software.
3 Configure the CrownNet interface.
4 Configure the network.
5 Configure the user workstations.
Operating System Protocol
AppleTalk EtherTalk
LAN Manager/LAN Server NetBIOS/NetBEUI
NetWare IPX/SPX/TCP/IP
UNIX TCP/IP
Windows 3.1/Windows 95/Windows NTTCP/IP/NetBIOS/NetBEUI