User`s guide
3&3ULQWLQJ
6RIWZDUH
4063ULQW 6 \VWHP*H WWL Q
J
6WDUWHG
10 Change to the
y
/PLATFORM/WIN_NT/DRIVER/4X/
type
direc-
tory, where
y
is the workstation’s CD-ROM drive, and the
type
is the type of processor on your workstation.
OEMSETUP.INF displays in the File Name list.
11 Choose OK.
A list if QMS printers displays.
12 Select QMS 2060, and choose Next.
13 When prompted, choose Replace Existing Driver, and then
choose Next.
14 When prompted for a printer name, either accept the dis-
played name or type a new one, and then choose Next.
15 When prompted for sharing information, choose either
Shared (and type a Share name) or Not Shared, and choose
Next.
16 When prompted, select the operating systems of ALL com-
puters that will be printing to the printer, and then choose
Next.
17 When asked if you’d like to print a test page, choose either
Yes or No, and then choose Finish.
Reinstallation
»Note:
If a Microsoft Windows NT 4.0 or a QMS Level 2 Windows
NT 4.0 printer driver has been previously installed, you must use the
following procedure to delete the files before installing a new printer
driver.
1 Open Windows NT Explorer (from the Start>Programs menu
choose Windows NT Explorer).
2 Delete the printer(s) you want to replace or upgrade.
3 Install the new printers using the installation procedure on
page 3-10.
4 Reboot your workstation.