Specifications

Testing PC-
Printer
Communication
6-15Troubleshooting Printer Problems
Changing Serial Settings
Since your printer is configured at the factory for the most typical
printing environments, the serial settings in your AUTOEXEC.BAT file
and on the start-up page should be the same. However, if they differ,
you must configure the printer to use the serial settings specified in
the AUTOEXEC.BAT file.
Press the following control panel keys in the order shown
Press
this
key...
to... For 1.5 seconds, the
message window
reads...
and then it reads...
Online/
Offline
Turn off the Ready
indicator and
enable printer
configuration.
IDLE
Menu Access the
configuration
menu.
CONFIGURATION OPERATOR CONTROL
Next Advance to the
Administration
menu.
ADMINISTRATION
Select Access the
Administration
menu.
COMMUNICATIONS
Select Access the
Communications
menu.
TIMEOUTS
Next Advance to the
Serial menu.
SERIAL
Select Access the Serial
menu.
MODE