Specifications

INSTALLING THE LIGHT KIT ASSEMBLY

Light Kit Warranty

“This Ceiling fan Light Kit Fixture is covered by a Limited 2 year Warranty from the

Manufacturer, effective from the date of purchase. This fixture is warranted against defects in

the quality of the housing, trims, diffuser, shades, and electrical components. Fixture finishes

and/or lamps (bulbs) are expressly excluded from this warranty; refer to bulb manufacturer for

lamp warranty.”

LIGHT KIT PLATE

Fig .18

OUTER

SCREW

CONNECTOR

NOTE: Before starting installation, disconnect the power by turning off the

breake or removing the fuse at fuse box.

Step1. Remove one of the three outer screws and loosen the other 2 from the light kit

plate.(Do not remove.)(Fig. 18)

Step2. Connect WHITE(BLUE) wire from light kit plate to WHITE(BLACK) wire from light kit

assembly with the connector.(Fig.18)

Step3. Place the key holes from the light kit assembly over the 2 screws previously loosened

from the light kit plate , turn light kit assembly until it locks in place at the narrow section of

the key holes. Secure by tightening the 2 screws previously loosened and the one previously

LIGHT KIT ASSEMBLY