Instruction manual

LOCK PIN
5. THE ELECTRICAL CONNECTIONS
REMEMBER to shut the power off
at the circuit breaker or fuse box.
Follow the steps below to
connect the fan to your house
supply wires. Use the wire nuts
supplied with your fan. Secure the
wire nuts by wrapping the
connection with electrical tape.
Step 1. Connect the black (hot)
wire from the ceiling to the black
and the blue wires from the fan.
Connect the white (Neutral) wire
from the ceiling to the white wire
from the fan. (Fig 11)
Step 2. If your outlet has a
ground wire (Green or Bare
Copper) connect the fan ground
wires (on hanger ball and hanger
bracket) to it; otherwise,
connect the fan ground wire on
hanger ball directly to hanger
bracket (Fig. 11)
Step 3. Figure 12 & 13 Illustrate
the wiring connections using
optional wall unit. (Available at
your Minka-Aire™ Retailer.)
NOTE: If a light kit is not included
with your fan, one can be
purchased at you Minka-Aire™
Retailer.