Instruction manual

Fan Size Speed Volts Amps Watts RPM CFM N.W. G.W. C.F
Low 120 0.21 10.9 62 2,500
52" Med 120 0.32 25 105 5,100
6.0KGS 6.8KGS 1.33
High 120 0.47 56 158 8,200
These are typical readings. Your actual fan may vary. They do not
include Amps and Wattage used by the light kit.
12. SPECIFICATIONS
11. TROUBLESHOOTING
Problem Solution
1. Check fuses or circuit breakers.
2. Check line wire connections to fan and switch wire
connections in switch housing.
CAUTION: Make sure main power is off.
1. Allow a 24-hour "break-in" period. Most noises
associated with a new fan go away during this time.
2. Make sure all motor housing screws are snug.
3. Make sure the screws that attach the fan blade
bracket to the motor hub are tight.
4. Some fan motors are sensitive to signals from
solid-state variable speed controls. If you have
installed this type of control, choose and install
another type of control.
1. Check that all blade and blade holder screws are
secured.
2. Use the enclosed blade balancing kit if blade wobble
is still excessive. (See instructions included with the
balancing kit.)
NOTE: All blade sets are grouped by weight. Because
natural woods vary in density, the fan may wobble even
though blades are weight matched.
Fan will not start.
Fan sounds noisy.
Fan Wobbles