Instruction manual

Fig. 18

INSTALLING THE LIGHT KIT

MOUNTING PLATE

Step 1. Remove 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not

remove)

Step 2. Place the key holes from the light kit mounting plate over the 2 screws previously

loosened from the mounting ring, turn Light kit mounting plate until it locks in place at the

narrow section of the key holes. Secure by tightening the 2 screws previously loosened and

the one previously removed. (Fig. 18)

LIGHT KIT

MOUNTING

PLATE

SCREWS

MOUNTING RING