Installation Sheet

INSTALLATION INSTRUCTIONS
Item#1219-706 (New. 03/07/2020)
READ AND SAVE THESE INSTRUCTIONS
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
Fig. 3
HANGING THE FIXTURE (Fig. 1)
1. Shut off power at the fuse box or circuit breaker
box and remove the old fixture including the
mounting hardware.
2. Carefully unpack your new fixture and lay out all
the parts in a clear area. Take care not to
misplace any small parts necessary for
installation.
3. Thread screws (A) into the pre-drilled holes in the
circular strap (B) spaced the same distance apart
as the holes in the canopy (D).
4. Attach the circular strap (B) to the junction box
using mounting screws (C) (Size: #8-32N*L0.5”).
The side of the circular strap marked “GND” must
face out.
5. Secure the rod and canopy assembly (F) onto the
nipple (G) located on the top of fixture body.
CONNECTING THE WIRES (Fig. 2)
6. At this point, connect the fixture wires to the outlet
box wires as shown in Fig. 2, making sure that all
wire connectors are secured. If your outlet has a
ground wire (green or bare copper), connect the
fixture’s ground wire to it. Otherwise, connect the
fixture’s ground wire directly to the circular strap
(B) using the green screw provided. After wires
connected, tuck them carefully into the outlet box.
COMPLETING THE INSTALLATION (Fig. 1)
7. Thread screws (A) into canopy (D), and secure
with knurled knobs (E).
8. Place the candle cover (I) over the socket (H) of
the fixture body.
9. Install (4) four candelabra base bulbs (J) up to 60
watts each or CFL or LED equivalent (not
included) in accordance with the fixture
specification—DO NOT EXCEED THE MAXIMUM
WATTAGE RATING! (NE PAS DEPASSER LA
PUISSANCE NOMINALE MAXIMALE!).
10. Adjust frames to proper position. (Fig.4)
Your installation is now complete. Return power to
the outlet box and test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-3237E
Set
#
A
-
020
-Circular Strap
-Ground screw
-Mounting Screw*2
Candle Cover
#
CCV
240
70
P
-
248
H
I
J
G
A
C
B
D
F
E
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)