User`s manual

MINIX
890GX/880G-USB3 User's Manual
- 39 -
BIOS SETUP UTILITY
JUSTwoot!
Memory Configuration Enabled Bank Memory
Interleaving
←
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Bank Interleaving
Enable Clock to All DIMMs
MemClk Tristate C3/ATLVID
Memory Hole Remapping
DCT Unganged Mode
Power Down Enable
Power smashing
[Auto]
[Disabled]
[Disabled]
[Enabled]
[Always]
[Enabled]
[Enabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
►
Memory Conguration
Click <Enter> key to enter its submenu.
►
DRAM Timing Conguration
This submenu allows you to set Memory Clock Mode and DRAM Time Mode.
• Bank Interleaving
Sets the bank interleaving feature.
• Enable Clock to All DIMMs
This item is to enable or disable the unused clocks to DIMMs even the memory slots are not
populated.
• MemClk Tristate C3/ATLVID
Enables or disables the MemClk Tri-Stating during C3 and Alt VID.
• Memory Hole Remapping
Enables or disables the memory remapping around the memory hole.
• DCT Unganged Mode
This item allows the selection of the unganged DRAM mode (64-bit width).
• Power Down Enable
This item is to enable or disable the DDR power down mode.
• Page Smashing
S/w Control of page Smashing Mechanism.