User`s manual

MINIX
890GX/880G-USB3 User's Manual
- 13 -
7.) After you have installe d the
motherboard and the I/O shield into
the computer case, you could start
mounting the antennas onto the I/O
shield, keep the ring of both antennas
within the side of the computer case
and let the studs to go through the
I/O shield to outside of the computer
case.
8.) Now screw both nuts back to the
bolts of the antennas clock-wisely
until they are tight enough to hold the
antennas in position.
9.) Screw both antennas onto the
studs clock-wisely until they are tight
enough to hold themselves in position.
10.) Adjust the angle of the antennas,
and now y o u h a v e f i n i s h e d the
antenna installation.
7 8
9
10