User`s manual
MINIX
7025-UC3 User's Manual
- 38 -
►
Memory Conguration
Click <Enter> key to enter its submenu.
BIOS SETUP UTILITY
JUSTw00T!
Memory Configuration Enable Bank Memory
Interleaving
←
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Bank Interleavin
Channel Inter leaving
Enable Clock to All DIMMs
MemClk Tristate C3/ATLVID
Memory Hole Remapping
DCT Unganged Mode
Power Down Enable
Page Smashing
[Auto]
[Auto]
[Disabled]
[Disabled]
[Enabled]
[Always]
[Enabled]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
• Bank Interleaving
Sets the bank interleaving feature.
• Channel Interleaving
Enable Channel Memory Interleaving.
• Enable Clock to All DIMMs
This item is to enable or disable the unused clocks to DIMMs even the memory slots are not
populated.
• MemClk Tristate C3/ATLVID
Enables or disables the MemClk Tri-Stating during C3 and Alt VID.
• Memory Hole Remapping
Enables or disables the memory remapping around the memory hole.
• DCT Unganged Mode
This item allows the selection of the unganged DRAM mode (64-bit width).
• Power Down Enable
This item is to enable or disable the DDR power down mode.
• Page Smashing
S/W Control of Page Smashing Mechanism.