User`s manual

MINIX 7025-UC3 User's Manual
- 35 -
4.5.8 JUSTw00t! Setting(OverClock Settings)
BIOS SETUP UTILITY
Main Advanced Boot Security Power JUSTw00T! Exit
OverClock Settings
ConFigur CPU
frequency and
voltage
←
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
►
AMD Overclocking Configuration
►
DRAM Timing ConFiguration
►
Memory Configuration
Memory 2T Mode [2T Mode]
Memory CLK :N/A,667MHZ
CAS Latency(Tcl) :N/A,9 CLK
RAS/CAS Delay(Trcd) :N/A,9 CLK
Row Precharge Time(Trp) :N/A,9 CLK
Min Active RAS(Tras) :N/A,24 CLK
RAS/RAS Delay(trrd) :N/A,4 CLK
Row Cycle (Trc) :N/A,33 CLK
Write Recover Time(Twr) :N/A,6 CLK
CPU/LTD Spread Spectrum [200.0]
PCIE Spread Spectrum [Enabled]
SATA Spread Spectrum [Enabled]
GPU Over control [Auto]
CPU Frequency,MHZ [200.0]
MCP PCI-Express Frequency,MHZ [100]
CPU Voltage Control [Auto]
CPU Voltage :1.264v
K10 CPUNB Voltage Control [Auto]
DRAM Voltage Control [Auto]
DRAM Voltage :1.936 v
Chipset Voltage Control [Auto]
Chip Voltage :1.272v
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.