User's Manual Rev: 1.0, December 2010 Website: http://www.jwele.
Disclaimer The intellectual property of this manual belongs to our company. The ownership of all of the products, including accessories and software etc. belong to our company. No one is permitted to copy, change, or translate without our written permission. We compiled this manual based on our careful attitude, but we can not guarantee the accuracy of the contents.
Table of Contents Chapter 1 Introduction............................................................................................. 4 1.1 1.2 1.3 1.4 Package Checklist.................................................................................................................4 Specifications.......................................................................................................................5 Mainboard Layout............................................................................
MINIX 7025-UC3 User's Manual Chapter 1 Introduction 1.1 Package Checklist Thank you for choosing our product. Please check the following packing and accessories, if there is any broken or part missing, please contact with your franchiser. • • • • • Rear I/O Panel X 1 User's Manual X 1 Driver/Utility CD X 1 Serial ATA Signal Cable X 2 Serial ATA Power Cable X 2 The items listed above are for reference only, and are subject to change without notice.
MINIX 7025-UC3 User's Manual 1.2 Specifications CPU Main Chipset - Support AMD(R) Socket AM3 processors - AMD Phenom™ II x4/ Phenom™ II x3/ Phenom™ II x2/ Athlon™ II x4/ Athlon™II x3/Athlon™ II x2/ Sempron™ 1xx processors - Integrated GeForce® 7025 & nForce® 630a MCP Support 2x1.
MINIX 7025-UC3 User's Manual 1.3 Mainboard Layout JC61D3ITX01 V1 .
MINIX 7025-UC3 User's Manual 1.4 Connecting Rear Panel I/O Devices The rear I/O part of these mainboard provides the following I/O ports: PS 2 Mouse PS 2 Keyboard (This picture is only for reference) • PS/2 Mouse: Connects to a PS/2 mouse. • PS/2 Keyboard: Connects to a PS/2 keyboard. • VGA: Connects to a monitor's VGA input. • COM: Connect to external modem.mouse or other devices that support this communication portocol. • USB: The USB ports are used to connect USB 2.0/1.
MINIX 7025-UC3 User's Manual Chapter 2 Hardware Setup 2.1 Choosing a Computer Chassis • Choose a chassis big enough to install this mainboard. • As some features for this mainboard are implemented by cabling connectors on the mainboard to indicators and switches or buttons on the chassis, make sure your chassis supports all the features required. • If there is possibility of adopting some more hard drives, make sure your chassis has sufficient power and space for them.
MINIX 7025-UC3 User's Manual 2.3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the mainboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and CPU cooler. 4.
MINIX 7025-UC3 User's Manual 2.3.2 Installation of the CPU Cooler For proper installation, please kindly refer to the instruction manuals of your CPU Cooler. 2.4 Installation of Memory Modules This mainboard provides two 1.5v DDR3 DIMM slots, which supports dual channel memory technology. To activate the dual channel configuration, you need to install two identical (same brand, speed, size and chip-type) memory modules into these DIMM slots. Otherwise the memory will only operate at single channel mode.
MINIX 7025-UC3 User's Manual 2.5 Connecting Peripheral Devices 2.5.1 Serial ATA Connectors Each SATA connector serves as one single channel to connect one SATA device by SATA cable. JC61D3ITX01 V1 . 0 170 * 170 CFAN PS 2 COM1 SFAN1 FUSB2 JLPC FUSB1 3 VGA FPANEL PWR12V USB B T1 SFAN2 USB _ LAN1 SPEAK F _ AUDIO JSPDIF SATA2 SATA1 AUDIO SATA4 SATA3 JBAT PCIE1 2.5.2 PCIE slot Install PCIE card into slot “PCIE1” .
MINIX 7025-UC3 User's Manual Chapter 3 Jumpers & Headers Setup Quick Components Guide 11 JC61D3ITX01 V1 . 0 170 * 170 CFAN PS 2 10 COM1 SFAN1 9 8 FUSB2 VGA FPANEL PWR12V FUSB1 3 7 JLPC 12 USB B T1 6 SFAN2 USB _ LAN1 SPEAK SATA2 SATA1 SATA4 SATA3 JSPDIF AUDIO JBAT F _ AUDIO PCIE1 NO. 1 2 3 4 5 6 7 1 23 Layout F_AUDIO SFAN2 JSPDIF JBAT SPEAK ATXPWR FUSB1/FUSB2 4 Page NO. No. 13 13 1 1 1 1 1 8 9 10 11 12 - 12 - 5 Layout FPANEL SFAN1 CFAN PWR12V JLPC Page NO.
MINIX 7025-UC3 User's Manual Checking Jumper Settings • For a 2-pin jumper, plug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position. • For 3-pin jumper, pin 1~2 or pin 2~3 can be shorted by plugging the jumper cap in. How to identify the PIN1 jumpers? Please check the mainboard carefully, the PIN1 is marked by "1" or white thick line. 1-F_AUDIO(Front Panel Audio Connection Header) Pin No.
MINIX 7025-UC3 User's Manual GND 3-S/PDIF Output Connection Header S/PDIF (Sony/Philips Digital Interface) is a standard audio transfer file format. It is usually found on digital audio equipment such as a DAT (Digital Audio Tape) machine or audio processing device. It allows the transfer of audio from one file to another without the conversion to and from an analog format, which could degrade the signal quality.
MINIX 7025-UC3 User's Manual 6/11- ATX Power Input Connectors ATXPWR (ATX Power) connector We recommend to use our motherboard with a power supply that complies with the ATX12V Power Supply Design Guide Version 1.1. Every ATX12V power supply unit has a standard 24-pin ATX main power connector that must be plugged into this connector. If you would like to use an old power supply with only a 20-pin ATX main power connector, then please plug the 20-pin ATX main power connector along with pin 1 and pin 13.
MINIX 7025-UC3 User's Manual 10-CFAN(CPU Fan Power Connectors Header) CFAN：CPU fan connectors Pin No. 1 2 3 4 Definition GND +12V RPM Control These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 12-JLPC This set of headers are reserved for internal debug purpose.
MINIX 7025-UC3 User's Manual Chapter 4 BIOS Setup Utility BIOS stands for Basic Input and Output System. It was once called ROM BIOS when it was stored in a Read-Only Memory (ROM) chip. Now manufacturers would like to store BIOS in EEPROM which means Electrically Erasable Programmable Memory. BIOS used in this series of mainboard is stored in EEPROM, and is the first program to run when you turn on your computer. BIOS performs the following functions: 1.
MINIX 7025-UC3 User's Manual before the operating system is started. Each of POST routines is assigned a POST code, a unique number which is sent to I/O port 080h before the routine is executed. 4.5 BIOS Setup — CMOS Setup Utility • In order to increase system stability and performance, our engineering staff is constantly improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen.
MINIX 7025-UC3 User's Manual The menu bar on top of the screen has the following main items: Main For changing the basic system configuration. Advanced For changing the advanced system settings. Boot For changing the system boot configuration. Security For changing the system security setttings. Power For changing the advanced power management(APM) configuration. Exit For selecting the exit options and loading default settings. 4.5.
MINIX 7025-UC3 User's Manual 4.5.3 Main Menu Main Advanced Boot BIOS SETUP UTILITY Security Power JUSTW00t! Exit ► System Information System Time System Date Power On Beep ► ► ► ► SATA SATA SATA SATA Port Port Port Port 1 2 3 4 ► CPU TDP Verify [20:50:32] [Tue 09/03/2009] [Enabled] ←↓ [ST380215AS] ↑ [Not Detected] Enter [Not Detected] F1 [Not Detected] F10 ESC [Disabled] : : : : Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit v02.
MINIX 7025-UC3 User's Manual • System time This item sets the time you specify(usually the current time)in the format of [Hour],[Minute]and [Second]. • System date This item sets the date you specify(usually the current date in the format of [Month],[Date],and [Year]. • Power on Beep A beep on post.Options: Disabled,Enabled. ► SATA Port 1/2/3/4 This item sets the status of auto detection of SATA/IDE devices while enterting setup, and BIOS will auto detects the presence of SATA/IDE devices.
MINIX 7025-UC3 User's Manual • PIO Mode Allows you to select the data transfer mode. • DMA Mode Selects the DMA mode. • S.M.A.R.T Set the Smart Monitoring, Analysis, and Reporting Technology. • 32Bit Data Transfer Enables or disables 32-bit data transfer. • Back to Main Setup Menu • CPU TDP Verify Options: Disabled,Enabled. 4.5.4 Advanced Setting BIOS SETUP UTILITY Main Advanced Boot Security Advanced Settings ► ► ► ► Power JUSTW00t! Exit Configure CPU.
MINIX 7025-UC3 User's Manual BIOS SETUP UTILITY Advanced CPU Configuration Moudule Version: 14.16 AGESA Version: 3.7.0.0 Physical Count : 1 Logical Count : 2 AMD Athlon(tm) II X2 240 Processor Revision: C2 Cache L1: 384KB Cache L2: 1536KB Speed : 2727MHz, NB Clk: 1800MHz Able to Change Freq.
MINIX 7025-UC3 ► Chipset Configuration Click key to enter its submenu, it will be display chipset configuration. User's Manual BIOS SETUP UTILITY Advanced Advanced Chipset Setting WARNING: Setting wrong values in below sections may cause system to malfunction. NUMM ROM Version: 4.082.
MINIX 7025-UC3 User's Manual • OnChip VGA Frame Buffer Size iGPU Frame Buffer size. • Onboard IDE Controller Allows BIOS to Enable or Disable IDE Controller • Serial-ATA 0 Options:Enabled,Disabled. • Hard disk write protect Disable/enable device write protection.this will be effictive only if device is accessed through BIOS. • IDE Detect Time Out Select the time out value for detecting ATA/ATAPI device(s) • ATA(PI) 80Pin Cable Detection Select the mechanism for detecting 88pin ATA(PI) Cable.
MINIX 7025-UC3 User's Manual ► USB Device The items in this menu allows you to change the USB-related features. BIOS SETUP UTILITY Main USB Configuration Module Version -2.24.3-13.4 USB Devices Enabled : None Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-Off USB1 1.1 Controller USB1 2.0 Controller [Enabled] [HiSpeed] [Enabled] [Enabled] [Enabled] Enables support for legacy USB. AUTO option disables legacy support if no USB devices are connected.
MINIX 7025-UC3 ► PCIPnP Click key to enter its submenu. User's Manual BIOS SETUP UTILITY Advanced Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction.
MINIX 7025-UC3 User's Manual • Clear NVRAM This item for clearing NVRAM during system boot. Optional:Yes,No • Plug & Play O/S This item lets the BIOS configure all the devices in the system or lets the operating system configure plug and play (PnP) devices not required for boot if your system has a Plug and Play operating system. Optional:Yes,No • PCI Latency Timer This item sets value in units of PCI clocks for PCI device latency timer register.
MINIX 7025-UC3 User's Manual 4.5.5 Boot Setting Main Advanced Boot BIOS SETUP UTILITY Security Power PC&Health Boot Settings Exit Configure Settings during System Boot. ► Boot Settings Configuration ← ► Boot Device Priority ► Hard Disk Drives ► Removable Drives ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit v02.61 (C)Copyright 1985-2006, American Megatrends, Inc. ► Boot Settings Configuration Click key to enter its submenu.
MINIX 7025-UC3 User's Manual • Halt On Options:All Errors,No Errors,All But Keyboard. • Wait For 'F1' If Error When set to Enabled,the system waits for the F1 key t be pressed when error occurs. • Hit 'Del' Message Display When set to Enabled,the system displays the message "Press DEL to run Setup" durning POST. • Interrupt 19 Capture When set to Enabled, this function allows the option ROMs to trap Interrupt 19.
MINIX 7025-UC3 User's Manual 4.5.6 Security Setting Main Advanced Boot BIOS SETUP UTILITY Security Power PC&Health Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check Boot Sector Virus Protection Flash Write Protection Exit Install or Change the password.
MINIX 7025-UC3 User's Manual 4.5.7 Power Setting Main Advanced Boot BIOS SETUP UTILITY Security Power Power Settings JUSTw00T! Exit Section for Advanced ACPI Configuration. ► ACPI Configuration ► APM Configuration ► PC Health ←↑↓ Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2006, American Megatrends, Inc. ► ACPI Configuration Click key to enter its submenu.
MINIX 7025-UC3 User's Manual • ACPI Aware O/S Enable/Disable ACPI support for Operating system • Suspend Mode Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. ・ACPI Version Features Enable RSDP pointers to 64-bit Fixed system Description tables • ACPI APCI support Include ACPI APCI table Pointer to RADT pointer list. ・Press key to return to "Power" menu.
MINIX 7025-UC3 User's Manual ► PC Health Click key to enter its submenu, it will be display hardware health configuration, including System temperature, CPU temperature, FAN speed and all kinds of voltages.
MINIX 7025-UC3 User's Manual 4.5.
MINIX 7025-UC3 ► AMD Overclocking Configuration Click key to enter its submenu. User's Manual BIOS SETUP UTILITY JUSTw00T! AMD Overclocking Configuration Speed:2727MHZ, NB Clk:2000MHZ Maximum FSB Multiplier :13.
MINIX 7025-UC3 User's Manual ・Press key to return to "JUSTw00T!" menu. ► DRAM Timing Configuration BIOS SETUP UTILITY JUSTw00T! DRAM Timing Configuration Options Memory Clock Mode DRAM Timing Mode [Auto] [Auto] Memory 2T Mode [2T Mode] Auto Limit Manual ← ↑ ↓ +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit v02.61 (C)Copyright 1985-2006, American Megatrends, Inc. • Memory Clock Mode This item is to select the memory clock mode.
MINIX 7025-UC3 ► Memory Configuration Click key to enter its submenu.
MINIX 7025-UC3 User's Manual 4.5.9 Exit Setting Main Advanced Boot BIOS SETUP UTILITY Security Power Exit Options JUSTw00t! Exit Exit system setup after saving the changes. Save Changes and Exit Discard Changes and Exit Discard Changes ← Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit ↑ ↓ Load Optimal Defaults Load Failsafe Defaults v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
MINIX 7025-UC3 User's Manual Highlight this item and select ,then press to discard any changes that you have made in the Setup Utility and exit the Setup Utility. Or press to return to the main menu. Main Advanced BIOS SETUP UTILITY Security Power Boot Exit Options JUSTw00t! Exit Exit system setup without saving any changes. Save Changes and Exit Discard Changes and Exit Discard Changes ESC key can be used for this operation.
MINIX 7025-UC3 User's Manual This option opens a dialog box that let you install optimized defaults for all appropriate items in the Setup Utility. Select and then to install the defaults. select and then to not install the defaults. The optimized defaults place demand on the system that may be greater than the performance level of the components, such as the CPU and the memory.
MINIX 7025-UC3 User's Manual Chapter 5 Driver Installation Check your package and there is Driver CD included. This CD consists of all drivers you need. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which drivers needed so that your system can function properly. Insert CD into your CD-ROM drive and the menu should appear as below.
MINIX 7025-UC3 User's Manual When you choose Mainboard Driver installation Utility, the drivers menu should appear as below: Back <- nForce Chipset Installation Utility Nvidia VGA Graphics Driver Onboard LAN Driver Realtek HD Audio Driver Exit (This picture is only for reference) From 1. 2. 3. 4. 5. the Drivers MENU you may make 4 selections: nForce Chipset Installation Utility Nvidia VGA Graphics Driver Onboard LAN Driver Realtek HD Audio Driver Exit: Click to exit this installation menu.
